First, pay attention to matters:

1, the work environment of the stickers at 15 ℃ 30 ℃ between the better. Because the temperature is too high will lead to a larger film, wet solution rapid evaporation; temperature is too low will affect the film's flexibility, thus affecting the attachment effect.

2, the use of water and neutral cleaning agent to thoroughly clean the surface of the body. In order to make a normal color stick up, the body surface must be no dust, wax and other dirt.

3, stickers in three layers, at the end of paper (white glass surface paper), PVC stickers themselves, transfer film both protective film (transparent), surface protective film in the final after the completion of thrown off. In the paste process, careful not to pull the sticker to prevent elongation deformation.

 

Second, the installation steps

1, according to the drawings to determine the location of paste, compared to size.

2, the body needs to sticky parts clean:

Method: The mixture of detergent and water (1:10) evenly sprayed in the body parts to keep moist, the solution can make the film easier to control, and make it in the permanent adhesion before the correct positioning.